Transfer Guidelines
| Film Type | Film Thickness Mircon (with Hot Melt) | How To Print / Cut | Temperature | Press Time | Peel Type |
| PU | 42 (96) | Cut the design in reverse | 300F~320F | 8 - 10 sec | Cool peel |
| PU - Vent Hole | 42 (96) | 300F~320F | 8 - 10 sec | Cool peel | |
| PVC (Normal) | 110 (166) | 300F~320F | 8 - 10 sec | Cool peel | |
| PVC (Neon) | 150 (200) | 300F~320F | 8 - 10 sec | Cool peel | |
| Glitter | 264 (354) | 300F~320F | 8 - 10 sec | Cool peel | |
| Flock | 500 (566) | 300F~320F | 8 - 10 sec | Cool peel | |
| Hologram | 32 (82) | 300F~320F | 8 - 12 sec | Warm peel | |
| Metallic | 32 (82) | 300F~320F | 10 - 12 sec | Warm peel | |
| Soft Metallic | 30 (90) | 300F~320F | 10 - 12 sec | Warm peel | |
| Reflective | 120 (180) | 300F~320F | 8 - 10 sec | Cool peel | |
| Foam PU | 105 (160) | 300F~320F | 5 - 8 sec | Warm peel | |
| Glow in the dark | 160 (210) | 300F~320F | 7 - 10 sec | Cool peel | |
| Printable - PU | 30 (85) | Direct print & cut on to the film | 300F~320F | 8 - 10 sec | Cool peel |
| Printable - PU SB | 40 (95) | 300F~320F | 8 - 10 sec | Cool peel | |
| Printable - PVC | 85 (140) | 300F~320F | 8 - 10 sec | Cool peel |
*Pressing Tip*
| Reflective Silver (non-sticky pet) |
Please press reflective film on fabric just for 1 second and then remove the pet film. After that, please press for 10 seconds directly on reflective vinyl applied fabric. |
| Soft Metallic | After pressing soft metallic on fabric and then removing the pet film, please press directly on soft metallic applied fabric one more time. In this way, you will have a longer wash durability. |
Washing Conditions
